Hytera PD715 Ex Atex Radio
Frequency range |
VHF: 136 - 174 MHz |
Supported operating modes |
DMR Tier II in accordance with ETSI TS 102 361-1/2/3 |
Number of channels |
1024 |
Number of zones |
16 (with up to 16 channels each) |
Channel spacing |
12.5 / 20 / 25 kHz (analog) |
Operating voltage |
7.4 V (nominal) |
Standard battery |
1800 mAh (lithium-ion battery) |
Battery service life (5-5-90 duty cycle, high transmitting power, standard battery) |
approx. 14 hours (analog) |
Frequency stability |
±1.5 ppm |
Antenna impedance |
50 Ω |
Dimensions (H×W×D, without antenna) |
141 x 55 x 37 mm |
Weight (with antenna and standard battery) |
485 g |
Transmitter
Transmitting power |
1 W |
Modulation |
11K0F3E at 12.5 kHz |
4FSK digital modulation |
12.5 kHz (data only): 7K60FXD |
Interfering signals and harmonics |
-36 dBm (< 1 GHz) |
Modulation limiting |
±2.5 kHz at 12.5 kHz |
Noise cancellation |
40 dB at 12.5 kHz |
Adjacent channel selectivity |
60 dB at 12.5 kHz |
Audio response |
+1 dB to -3 dB |
Audio distortion |
≤ 3 % |
Digital vocoder type |
AMBE+2™ |
Receiver
Sensitivity (analog) |
0.3 μV (12 dB SINAD) |
Sensitivity (digital) |
0.3 μV / BER 5 % |
Adjacent channel selectivity |
TIA-603: 60 dB at 12.5 kHz / 70 dB at 20 and 25 kHz |
Intermodulation |
TIA-603: 70 dB at 12.5/20/25 kHz |
Spurious response rejection |
TIA-603: 70 dB at 12.5/20/25 kHz |
Signal-noise ratio (S/N) |
40 dB at 12.5 kHz |
Nominal audio power output |
0.5 W |
Audio response |
+1 dB to -3 dB |
Audio distortion |
≤ 3 % |
Conducted spurious emission |
< -57 dBm |
Environmental conditions
Operating temperature range |
-20 °C to +50 °C |
Storage temperature range |
-40 °C to +85 °C |
ESD |
IEC 61000-4-2 (level 4) |
Protection against dust and moisture |
IP67 |
Shock and vibration resistance |
MIL-STD-810 C/D/E/F/G |
Relative humidity |
MIL-STD-810 C/D/E/F/G |
Explosion protection |
Gas: II 2G Ex ib IIC T4 |
GPS
Time to first fix (TTFF) |
< 1 minute (cold start) |
Horizontal accuracy |
< 10 m |